Do you want to add a photo to the quilt that looked similar to part of the fabric than an iron-on decal?
Before, we used photo transfer paper to iron our photo onto our quilt block. Have you ever heard about direct-to-garment printing? It’s an excellent new method to get your best photo away from your scrapbook and on your quilt block.
Direct-to-garment (DTG) printing is a type of digital printing. With a price of about $20,000, it’s not practical to operate out and get your personal DTG printer. The typical price for coffee printer is $8 to $10.
This method is a little more costly in comparison to the traditional photo transfer method. That’s partially because the technology is very new. Should you decide to consider using a DTG photo in your memory quilt block, there are many factors to consider when deciding on the printer that will carry out the work for you:
1. Ensure you will find no chemicals necessary to pre-treat your fabric first. Some DTG printers create a graphic which is similar to screen printing. You don’t want that seem to be or feel on the quilt. The ink is going to be hard along with the fabric and definately will eventually (sometimes much sooner than later) will begin to crack and wear with washings. Ask your prospective printer to discover a sample of something they’ve printed. Whenever you can experience the ink is raised above the surface in any respect whatsoever, it’s probably a sublimation type process which requires chemicals to pre-treat the material.
2. Use a form of digital DTG printing available from the Brother GT 541. You will find no chemicals found it necessary to pre-treat the fabric. The inks bond with the natural fibers and so are heat cured to set the photo. The inks are water based, which assists leave a soft yet crisp image on your own fabric.
There are some downfalls to using uv printer on the quilt blocks. One pitfall is color limitations. Since DTG printing is a form an electronic printing, there is no white ink. White is the lack of color. This means that you can not print a photo on navy blue or black fabric.
Digital garment or fabric printing is really a CMYK format – cyan, magenta, yellow, and black. You are able to mix those colors to obtain a full spectrum of accurate colors – just not white. There are actually DTG printers that print white ink, but the majority of these require chemical pre-therapy for the fabric and will give you that thick surface print.
You should utilize a light colored or neutral fabric and it should be cotton or perhaps a cotton blend. The material must have the ability to withstand 350 degrees for approximately thirty seconds. In case you are not 09dexypky with 100 percent cotton or perhaps a 50/50 blend, ask your printer in case the fabric works.
Measurements of your print may be a limitation. Most DTG printers have got a printing field around 14 inches x 16 inches. For almost all quilters, that size range won’t be a problem.
And speaking of printing fields, here’s a hint. Most direct to garment printer charge for any 14×16 surface. In case your blocks allows 2 or 3 photos to suit within that range, you could get all of them printed for the buying price of one. Seek advice from the printer to determine if it’s possible with the particular project.
Like the majority of technological advances, the buying price of digital garment (or fabric) printing will most likely decrease after a while. Maybe it would even be available on smaller printers for home and private use. Until then, see if you can locate a DTG printer for your photo quilt project. The outcomes may be like custom fabric, that is to be a fantastic touch for your personal original quilt!